Users Guide

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.1.(0.0) Introduced on the S4810 and Z9000.
8.4.2.0 Introduced on the E-Series TeraScale.
8.3.19.0 Introduced on the S4820T.
Usage Information
Before you enable IPsec encryption on an OSPFv3 interface, rst enable IPv6 unicast routing globally,
congure an IPv6 address and enable OSPFv3 on the interface, and assign the interface to an area.
An SPI value must be unique to one IPsec security policy (authentication or encryption) on the router.
Congure the same encryption policy (same SPI and key) on each OSPFv3 interface in a link.
To remove an IPsec encryption policy from an interface, enter the no ipv6 ospf encryption spi
number command. To remove null authentication on an interface to allow the interface to inherit the
authentication policy congured for the OSPFv3 area, enter the no ipv6 ospf no ipv6 ospf
encryption null command.
Related Commands
area encryption – congures an IPsec encryption policy for an OSPFv3 area.
show crypto ipsec policy – displays the conguration of IPsec encryption policies.
show crypto ipsec sa ipv6 – displays the security associations set up for OSPFv3 interfaces in encryption
policies.
ipv6 ospf graceful-restart helper-reject
Congure an OSPFv3 interface to not act upon the Grace LSAs that it receives from a restarting OSPFv3 neighbor.
S4820T
Syntax
ipv6 ospf graceful-restart helper-reject
To disable the helper-reject role, enter no ipv6 ospf graceful-restart helper-reject.
Defaults The helper-reject role is not congured.
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.1.(0.0) Introduced on the S4810 and Z9000.
8.4.2.2 Introduced on E-Series TeraScale.
8.3.19.0 Introduced on the S4820T.
Usage Information
By default, OSPFv3 graceful restart is disabled and functions only in a helper role to help restarting neighbor
routers in their graceful restarts when it receives a Grace LSA.
Open Shortest Path First (OSPFv2 and OSPFv3)
1135