Users Guide

IPSecv6 policy name
Name of the IPsec security policy applied to the interface.
inbound/outbound ah
Authentication policy applied to inbound or outbound trac.
inbound/outbound esp
Encryption policy applied to inbound or outbound trac.
spi
Security policy index number used to identify the policy.
transform
Security algorithm that is used to provide authentication,
integrity, and condentiality.
in use settings
Transform that the SA uses (only transport mode is supported).
replay detection support Y: An SA has enabled the replay detection feature.
N: The replay detection feature is not enabled.
STATUS
ACTIVE: The authentication or encryption policy is enabled on
the interface.
show ipv6 ospf database
Display information in the OSPFv3 database, including link-state advertisements (LSAs).
S4820T
Syntax
show ipv6 ospf [process-number] [vrf vrf-name] database [database-summary |
grace-lsa]
Parameters
process-number Enter the OSPF process number.
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the VRF to display
neighbors corresponding to that VRF.
NOTE: If you do not specify this option, neighbors corresponding to the
default VRF are displayed.
database-summary
(OPTIONAL) Enter the keywords database-summary to view a summary of
database LSA information.
grace-lsa
(OPTIONAL): Enter the keywords grace-lsa to display the Type-11 Grace LSAs
sent and received on an OSPFv3 router.
Defaults none
Command Modes
EXEC
EXEC Privilege
Command History
Version Description
9.7(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Added support for OSPFv3 on the S4810 and Z9000.
Open Shortest Path First (OSPFv2 and OSPFv3)
1145