Users Guide

NOTE: Only one of the IP precedence values must be a successful match criterion, not all of the
specied IP precedence values must match.
Related Commands
class-map — identies the class map.
match mac access-group
Congure a match criterion for a class map, based on the contents of the designated MAC ACL.
S4820T
Syntax
match mac access-group {mac-acl-name}
Parameters
mac-acl-name Enter a MAC ACL name. Its contents is used as the match criteria in the class map.
Defaults none
Command Modes CLASS-MAP
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage Information To access this command, enter the class-map command. After the class map is identied, you can
congure the match criteria.
Related Commands class-map — identies the class map.
match mac dot1p
Congure a match criterion for a class map based on a dot1p value.
S4820T
Syntax
match mac dot1p {dot1p-list}
Parameters
dot1p-list Enter a dot1p value. The range is from 0 to 7.
Defaults none
Command Modes CLASS-MAP
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Quality of Service (QoS)
1231