Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4820T

1231

layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class Map. The

default is Layer 3.

Defaults Layer 3

Command Modes CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

Usage Information The input policy map is used to classify incoming trac to dierent ows using class-map, QoS policy, or

incoming packets DSCP. This command enables Policy-Map-Input Conguration mode (conf-policy-map-in).

Related Commands

service-queue — assigns a class map and QoS policy to dierent queues.

service-policy input — applies an input policy map to the selected interface.

policy-map-output

Create an output policy map.

S4820T

Syntax

policy-map-output policy-map-name

To remove a policy map, use the no policy-map-output policy-map-name command.

Parameters

policy-map-name Enter the name for the policy map in character format (32 characters maximum).

Defaults none