Users Guide
test cam-usage
Check the Input Policy Map conguration for the CAM usage.
S4820T
Syntax
test cam-usage service-policy input policy-map stack-unit {[number port-set
portpipe number] | [all]}
Parameters
policy-map Enter the policy map name.
stack-unitnumber (OPTIONAL) Enter the keyword stack-unit then the stack-unit slot number.
port-set portpipe
number
Enter the keywords port-set then the stack-unit port pipe number. The range is
from 0 or 1.
stack-unit all (OPTIONAL) Enter the keywords stack-unit all to indicate all stack-unit.
Defaults none
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage Information
This feature allows you to determine if the CAM has enough space available before applying the
conguration on an interface.
An input policy map with both Trust and Class-map conguration, the Class-map rules are ignored and only
the Trust rule is programmed in the CAM. In such an instance, the Estimated CAM output column contains
the size of the CAM space required for the Trust rule and not the Class-map rule.
The following describes the test cam-usage service-policy input policy-map stack-
unit command shown in the following example.
Field Description
stack-unit Indicates the stack-unit slot number.
Portpipe Indicates the portpipe number.
CAM Partition The CAM space where the rules are added.
Available CAM Indicates the free CAM space, in the partition, for the classication rules.
Quality of Service (QoS)
1251