Users Guide

Version Description
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
pre- 6.2.1.1 Introduced on the E-Series.
Usage Information To redistribute the default route (0.0.0.0/0), congure the default-information originate
command.
Related Commands
default-information originate — generates a default route for RIP trac.
redistribute isis
Redistribute routing information from an IS-IS instance.
S4820T
Syntax
redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric metric-
value] [route-map map-name]
To disable redistribution, use the no redistribute isis [tag] [level-1 | level-1-2 |
level-2] [metric metric-value] [route-map map-name] command.
Parameters
tag (OPTIONAL) Enter the name of the IS-IS routing process.
level-1 (OPTIONAL) Enter the keywords level-1 to redistribute only IS-IS Level-1
routes.
level-1-2 (OPTIONAL) Enter the keywords level-1-2 to redistribute both IS-IS Level-1
and Level-2 routes.
level-2 (OPTIONAL) Enter the keywords level-2 to redistribute only IS-IS Level-2
routes.
metric metric-value (OPTIONAL) Enter the keyword metric then a number as the metric value. The
range is from 0 to 16.
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of a congured
route map.
Defaults Not congured.
Command Modes ROUTER RIP
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant FTOS
Command Line Reference Guide.
The following is a list of the FTOS version history for this command.
Version Description
8.3.19.0 Introduced on the S4820T.
Routing Information Protocol (RIP)
1279