Users Guide

ip dhcp snooping binding
Create a static entry in the DHCP binding table.
Syntax
[no] ip dhcp snooping binding mac address vlan-id vlan-id ip ip-address
interface type slot/port lease number
Parameters
mac address Enter the keyword mac then the MAC address of the host to which the server is
leasing the IP address.
vlan-id vlan-id Enter the keywords vlan-id then the VLAN to which the host belongs. The
range is from 2 to 4094.
ip ip-address Enter the keyword ip then the IP address that the server is leasing.
interface type
Enter the keyword interface then the type of interface to which the host is
connected.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
• For a Loopback interface, enter the keyword loopback then a number from 0
to 16383.
slot/port Enter the slot and port number of the interface.
lease time Enter the keyword lease then the amount of time the IP address is leased. The
range is from 1 to 4294967295.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
Related Commands show ip dhcp snooping — displays the contents of the DHCP binding table.
Security
1389