Users Guide
all Enter the keyword all to copy the designated image to all stack members.
A Enter the keyword A to upgrade all stacked units in System A ( S4820T only).
B Enter the keyword B to upgrade all stacked units in System B ( S4820T only).
Defaults none
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage Information To reboot using the new image, use the upgrade boot system stack-unit command.
Related Commands
• reload — reboots Dell Networking OS.
• reset stack-unit — resets the designated stack member.
• show system (S-Series and Z-Series) — displays the status of all stack members or a specic member.
• show version — displays the current Dell Networking OS version information on the system.
• upgrade (S-Series management unit and Z-Series) — upgrades the bootash image or system image of
the S-Series management unit.
Stacking
1469