Users Guide

+$filesize; cmp.b $loadaddr 0xfff80000 $filesize
ethact=eTSEC1
ethaddr=00:01:E8:82:09:B2
serverip=10.11.9.4
primary_boot=f10boot tftp://10.11.9.2/si-S4810-40g
secondary_boot=f10boot flash0
default_boot=f10boot tftp://192.168.128.1/FTOS-SC-1.2.0.0E3.bin
gatewayip=10.11.192.254
ipaddr=10.11.198.114
netmask=255.255.0.0
mgmtautoneg=true
mgmtspeed100=true
mgmtfullduplex=true
stdin=serial
stdout=serial
stderr=serial
Environment size: 1002/8188 bytes
=>
Usage Information
• ethaddr=00:01:E8:82:09:B2 is the MAC address.
• primary_boot=f10boot tftp://10.11.9.2/si-S4810-40g,
secondary_boot=f10boot flash0, and default_boot=f10boot tftp://
192.168.128.1/FTOS-SC-1.2.0.0E3.bin are the boot variables.
• gatewayip=10.11.192.254 is the default gateway address.
• ipaddr=10.11.198.114 is the management IP address.
reset
Reload the system.
Syntax
reset
Command Modes uBoot
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Usage Information Save your changes before resetting the system or all your changes will be lost.
u-Boot
1509