Users Guide

save
Save congurations created in uBoot.
Syntax
save
Command Modes uBoot
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Usage Information Save your changes before resetting the system or all your changes will be lost.
setenv
Congure system settings.
Syntax
setenv [gatewayip address | primary_image f10boot location |
secondary_image f10boot location | default_image f10boot location | ipaddre
address | ethaddr address | enablepwdignore | stconfigignore]
Parameters
gatewayip address Enter the IP address for the default gateway.
primary_image Enter the keywords primary_image to congure the boot parameters used in
the rst attempt to boot Dell Networking OS.
secondary_image Enter the keywords secondary_image to congure boot parameters used if the
primary operating system boot selection is not available.
default_image Enter the keywords default_image to congure boot parameters used if the
secondary operating system boot parameter selection is not available.
NOTE: The default location should always be the internal ash device
(flash:), and a veried image should be stored there.
location Enter the location of the image le to be loaded. When using this command, the
keyword f10boot must precede the location. For example, primary_image
f10boot tftp://10.10.10.10/server.
ipaddr Enter the keyword ippaddr to congure the system management IP address.
ethaddr Enter the keyword ethaddr to congure system management MAC address.
address Enter the IP address in standard IPv4 format and the MAC address in standard
MAC format.
enablepwdignore Enter the keywords enableprdignore true to reload the system software
without the enable password congured.
stcongignore Enter the keywords stconfigignore true to ignore the startup conguration
le when reloading the system.
1510
u-Boot