Users Guide

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.2(0.0) Introduced on the M I/O Aggregator. This command is supported in Programmable-
Mux (PMUX) mode only.
9.2(0.2) Introduced on the Z9000, S4810, and S4820T.
9.0.2.0 Introduced on the S6000.
peer-link port-channel
Congure the specied port channel as the chassis interconnect trunk between VLT peers in the domain.
Syntax
peer-link port-channel port-channel-number {peer-down-vlan vlan id}
Parameters
port-channel-
number
Enter the port-channel number that acts as the interconnect trunk. The range is
from 1 to 128.
peer-down-vlan
vlan id
Enter the keyword peer-down-vlan then a VLAN ID to congure the VLAN
that the VLT peer link uses when the VLT peer is down.
Defaults Not congured.
Command Modes VLT DOMAIN
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.2(0.0) Introduced on the M I/O Aggregator. This command is supported in Programmable-
Mux (PMUX) mode only.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Added support for the peer-down-vlan parameter.
8.3.8.0 Introduced on the S4810.
Usage Information To congure the VLAN from where the VLT peer forwards packets received over the VLTi from an adjacent
VLT peer that is down, use the peer-down-vlan parameter. When a VLT peer with bare metal provisioning
(BMP) is booting up, it sends untagged DHCP discover packets to its peer over the VLTi. To ensure that the
DHCP discover packets are forwarded to the VLAN that has the DHCP server, use this conguration.
Virtual Link Trunking (VLT)
1545