Users Guide

PB for stp Enabled Disabled
Vlan-type-config
----------------
Codes:: P - Primary, C - Community, I - Isolated, N - Normal vlan, M -
Vlan-stack
Vlan-ID Local Peer
------- ----- ----
100 N M
Port-type-config
----------------
Codes:: p - PVLAN Promiscuous port, h - PVLAN Host port, t - PVLAN Trunk
port,
mt - Vlan-stack trunk port, mu - Vlan-stack access port, n -
Normal port
Vlt Lag Local Peer
------- ----- ----
128 mt mu
Vlan-stack protocol-type
------------------------
Local Peer
----- ----
0x4100 0x8100
VLT-VLAN config
---------------
Local Lag Peer Lag Local VLANs Peer VLANs
--------- -------- ----------- ----------
128 128 4094 100
Dell#
show vlt role
Displays the VLT peer status, role of the local VLT switch, VLT system MAC address and system priority, and the MAC address and
priority of the local VLT device.
Syntax
show vlt role
Default Not congured.
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
Virtual Link Trunking (VLT)
1553