Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4820T

1561

ip http vrf

Congures an HTTP client with a VRF that is used to connect to the HTTP server.

S4820T

Syntax

ip http vrf {management | vrf-name}

To undo the HTTP client conguration, use the ip http vrf command.

Parameters

management Enter the keyword management for conguring the management VRF that uses

an HTTP client.

vrf-name Enter the name of the VRF for conguring a nondefault that uses an HTTP client.

Defaults Disabled

Command Modes CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9500.

Usage Information To make the HTTP clients VRF-aware, use the ip http vrf command. The HTTP client uses the VRF

name that you specify to reach the HTTP server. If you do not specify a VRF name, then the HTTP client

uses the default VRF.

description

Enables you to specify a descriptive name for a customer VRF.

Syntax

description string

To delete the descriptive name for a customer VRF, use the no description string command.

Parameters

string Enter a descriptive name for the VRF.

Defaults None.

Command Modes VRF MODE