Users Guide

Parameters
vrrp-id (OPTIONAL) Enter the number of the VRRP group ID. The range is from 1 to 255.
ipv6 (OPTIONAL) Enter the keyword ipv6 to clear counters from the IPv6 VRRP
group.
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the name of the VRF to clear
counters that are maintained on the VRRP operations corresponding to that VRF.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Example
Dell#clear counters vrrp vrf jay
Clear "show vrrp" counters of all vrrp groups on all interfaces in VRF jay
[confirm] yes
debug vrrp
Allows you to enable debugging of VRRP.
Syntax
debug vrrp interface [vrrp-id] {all | bfd | database | interface | ipv6 |
packets | state | timer}
To disable debugging, use the no debug vrrp interface [vrrp-id] {all | bfd |
database | interface | ipv6 | packets | state | timer} command.
Parameters
interface Enter the following keywords and slot/port or number information
• For Port Channel interface types, enter the keywords port-channel then
the number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
•
For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
Virtual Router Redundancy Protocol (VRRP)
1579