Users Guide

show ethernet cfm maintenance-points local
Display congured MEPs and MIPs.
Syntax
show ethernet cfm maintenance-points local [mep | mip]
Parameters
mep Enter the keyword mep to display congured MEPs.
mip Enter the keyword mip to display congured MIPs.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the S-Series.
Example
Dell#show ethernet cfm maintenance-points local mip
-----------------------------------------------------
MPID Domain Name Level Type Port CCM-Status
MA Name VLAN Dir MAC
-----------------------------------------------------
0 service1 4 MIP Te 1/5 Disabled
My_MA 3333 DOWN 00:01:e8:0b:c6:36
0 service1 4 MIP Te 1/5 Disabled
Your_MA 3333 UP 00:01:e8:0b:c6:36
-----------------------------------------------------
MPID Domain Name Level Type Port CCM-Status
MA Name VLAN Dir MAC
-----------------------------------------------------
0 service1 4 MIP Te 1/5/1 Disabled
My_MA 3333 DOWN 00:01:e8:0b:c6:36
0 service1 4 MIP Te 1/5/1 Disabled
Your_MA 3333 UP 00:01:e8:0b:c6:36
show ethernet cfm maintenance-points remote
Display the MEP Database.
Syntax
show ethernet cfm maintenance-points remote detail [active | domain {level
| name} | expired | waiting]
Parameters
active Enter the keyword active to display only the MEPs in active state.
802.1ag
165