Users Guide
• $ = (dollar sign) the end of the output string.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Added the ipv4 multicast and ipv6 unicast parameters.
9.4.(0.0) Added support for VRF.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
The following describes the show ip bgp flap command shown in the following example.
Field Description
Network Displays the network ID to which the route is apping.
From Displays the IP address of the neighbor advertising the apping route.
Flaps Displays the number of times the route apped.
Duration Displays the hours:minutes:seconds since the route rst apped.
Reuse Displays the hours:minutes:seconds until the apped route is available.
Path Lists all the ASs the apping route passed through to reach the destination
network.
Example
Dell#show ip bgp flap-statistics
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
BGP local router ID is 192.168.11.5
Status codes: s suppressed, S stale, d dampened, h history, * valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r -
redistributed
n - network, D - denied, S - stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network From Flaps Duration
Reuse Path
h 77.0.0.0/24 172.16.0.2 1 00:00:03
00:00:00
d 55.0.0.0/24 172.16.0.2 3 00:00:25
00:30:44 200 i
*> 66.0.0.0/24 172.16.0.2 1 00:00:23
422
Border Gateway Protocol