Users Guide

00:00:00 200 i
Dell#*>n 66.66.77.77/32 0.0.0.0 0 32768 i
show ip bgp inconsistent-as
View routes with inconsistent originating autonomous system (AS) numbers; that is, prexes that are announced from the same
neighbor AS but with a dierent AS-Path.
S4820T
Syntax
show ip bgp [vrf vrf-name] [ipv4 unicast] inconsistent-as
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the name of the VRF to view routes
corresponding to the VRF that contain inconsistent originating AS numbers.
ipv4 unicast (OPTIONAL) Enter the keywords ipv4 unicast to view information only related
to ipv4 unicast routes.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.4.(0.0) Added support for VRF.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
The following describes the show ip bgp inconsistent-as command shown in the following
example.
Field Description
Network Displays the destination network prex of each BGP route.
Next Hop Displays the next hop address of the BGP router. If 0.0.0.0 is listed in this column,
then local routes exist in the routing table.
Metric Displays the BGP route’s metric, if assigned.
LocPrf Displays the BGP LOCAL_PREF attribute for the route.
Weight Displays the route’s weight.
Border Gateway Protocol
423