Users Guide

show qos dcb-buer-threshold
Displays the DCB buer threshold assigned to a QoS policy. This command is supported on the platform.
Syntax
show qos dcb buffer-threshold {name}
Parameters
name Enter the name of the prole, which can be a string of up to 32 characters in
length.
Command Modes
EXEC
EXEC Privilege
Command History
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.3(0.0) Introduced on the S6000 platform.
Usage Information The following table describes the output elds displayed for the show command:
Field Description
Name Name of the DCB buer threshold prole
Buer threshold parameters Buer size allocated for the PFC priority queue and
the priority of the queue
Example
Dell#show qos dcb buffer-threshold
Name : test1
Buffer threshold parameters:
pfc priority 0 buffer-size 40
pfc priority 3 buffer-size 50
dcb pfc-total-buer-size
Congure the total buer size for PFC in kilobytes. This utility is supported on the S6000 platform.
Syntax
dcb pfc-total—buffer—size KB
Parameters
KB Enter a number in the range of 0 to 7787.
Default The default is 1 KB for S6000 platforms.
Command Modes CONFIGURATION mode
Command History
Version Description
9.7(0.0) Introduced on the S6000-ON.
Data Center Bridging (DCB)
507