Users Guide

show processes cpu (S-Series) — displays the CPU usage information based on the processes running in an
S-Series.
show system (S-Series and Z-Series) — displays the current status of all the stack members or a specic
member.
show hardware buer interface
Display buer statistics for a specic interface.
Syntax
show hardware buffer inteface interface{priority-group { id | all } | queue
{ id| all} ] buffer-info
Parameters
interface interface
Enter any of the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
priority-group Enter the keyword priority-group followed by id for specic priority-group or
keyword all.
queue Enter the keyword queue followed by id for specic queue or keyword all.
buer-info To display total buer information for the interface, enter the keywords buffer-
info.
Command Modes
EXEC
EXEC Privilege
Command History
Version Description
9.8(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, Z9000, Z9500.
Example displaying
total-buer
information for the
interface
Dell# show hardware buffer interface tengigabitethernet 1/1 buffer-info
----- Buffer Stats for Interface Te 1/1 -----
Maximum Shared Limit for the Interface: 38336
Default Packet Buffer allocate for the Interface: 120
Used Packet Buffer for the Interface: 0
Example displaying
priority-group range
Dell#show hardware buffer interface tengigabitethernet 1/1 priority-group
0 buffer-info
----- Buffer stats for unit: 0 port: 1 (interface Te 1/1) -----
------------------------------------------------------------------------
PG# PRIORITIES ALLOTED (CELLS) COUNTER (CELLS)
MIN SHARED MODE HDRM MIN SHARED HDRM
------------------------------------------------------------------------
0 - 61440 0 STATIC 174 0 0 0
Dell#
Debugging and Diagnostics
527