Users Guide

clear p-snooping statistics
Clears the statistics on the FIP packets snooped on all VLANs, a specied VLAN, or a specied port interface.
S4820T
Syntax
clear fip-snooping statistics [interface vlan vlan-id | interface
fortyGigEport-type port/slot | interface port-channel port-channel-number]
Parameters
vlan-id Enter the VLAN ID of the FIP packet statistics to be cleared.
port-type port/slot Enter the port-type and slot number of the FIP packet statistics to be cleared.
port-
channelnumber
Enter the port channel number of the FIP packet statistics to be cleared.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the Z9500 and S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
debug p snooping
Enable debugging on FIP snooping.
S4820T
Syntax
debug fip-snooping [all | acl | error | ifm | info | ipc | tx]
Parameters
all Enter the keyword all to enable debugging on all the options.
acl Enter the keyword acl for ACL-specic debugging.
error Enter the keyword error for error-specic debugging.
ifm Enter the keyword ifm for IFM-specic debugging.
info Enter the keyword info for information-specic debugging.
ipc Enter the keyword ipc for IPC-specic debugging.
tx Enter the keyword tx for packet transmit-specic debugging.
Command Modes EXEC Privilege
586
FIP Snooping