Users Guide

Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the Z9500 and S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
debug p snooping rx
Enable debugging for FIP snooping receive-specic packets.
S4820T
Syntax
debug fip-snooping rx packet-type [all | discovery | virtual-link-
instantiation | virtual-link-maintenance| vlan-discovery] [interface]
Parameters
packet-type Enter the keyword packet-type and then the option type on which to enable
debugging. The options are:
• all — Enter the keyword all to enable debugging on all the options.
• discovery — Enter the keyword discovery to enable debugging on FCF
advertisements and ENode solicitation.
•
virtual-link-instantiation — Enter the keywords virtual-
link-instantiation to enable debugging on FLOGI, FDISC, and FLOGO
packets.
• virtual-link-maintenance — Enter the keywords virtual-link-
maintenance to enable debugging on FIP clear virtual link frames and
keepalives.
• vlan-discovery — Enter the keywords vlan-discovery to enable
debugging on VLAN requests and notications.
interface Enter the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
•
For a port channel interface, enter the keywords port-channel then a
number.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
FIP Snooping
587