Users Guide
p-snooping max-sessions-per-enodemac
Congure the maximum session limit per ENode MAC address.
S4820T
Syntax
fip-snooping max—sessions—per—enode—mac max-sessions-value
To return the congured maximum sessions to the default value, use the no fip-snooping max—
sessions—per—enode—mac command.
Parameters
max-sessions-value Enter the maximum number of sessions allowed per ENode MAC address. The
range is from 1 to 64.
Defaults 32
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the Z9500 and S6000-ON.
9.2(0.2) Introduced on the S4810 and S4820T.
p-snooping port-mode fcf
Congure the port for bridge-to-FCF links.
S4820T
Syntax
fip-snooping port-mode fcf
To disable the bridge-to-FCF link on a port, use the no fip-snooping port-mode fcf command.
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the Z9500 and S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Usage Information The maximum number of FCFs supported per FIP snooping-enabled VLAN is four.
590
FIP Snooping