Users Guide

Usage Information This command places you into the resilient ring protocol. After executing this command, the command line
prompt changes to conf-frrp.
show frrp
Display the resilient ring protocol conguration.
S4820T
Syntax
show frrp [ring-id [summary]] | [summary]
Parameters
ring-id Enter the ring identication number. The range is from 1 to 255
summary (OPTIONAL) Enter the keyword summary to view just a summarized version of
the Ring conguration.
Defaults none
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series.
7.4.1.0 Introduced.
Usage Information Executing this command without the optional ring-id command clears the statistics counters on all the
available rings. Dell Networking OS requires a command line conrmation before the command executes.
This command clears the following counters:
• hello Rx and Tx counters
• Topology change Rx and Tx counters
• The number of state change counters
Usage Information Executing this command without the optional ring-id command clears the statistics counters on all the
available rings. Dell Networking OS requires a command line conrmation before the command is executed.
This command clears the following counters:
• hello Rx and Tx counters
• Topology change Rx and Tx counters
606
Force10 Resilient Ring Protocol (FRRP)