Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4820T

611

612

613

614

615

616

617

618

619

620

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on C-Series, E-Series, and S-Series

Usage Information

• Join Timer — Join messages announce the willingness to register some attributes with other

participants. For reliability, each GARP application entity sends a Join message twice and uses a join

timer to set the sending interval.

• Leave Timer — Leave announces the willingness to de-register with other participants. Together with

Join, Leave messages help GARP participants complete attribute reregistration and de-registration.

The leave timer starts after receipt of a leave message sent for de-registering some attribute

information. If a Join message is not received before the Leave time expires, the GARP application

entity removes the attribute information as requested.

• Leave All Timer — The Leave All timer starts when a GARP application entity starts. When this timer

expires, the entity sends a Leave-all message so that other entities can reregister their attribute

information. Then the Leave-all time begins again.

Related Commands show garp timers — displays the current GARP times.

gvrp enable

Enable GVRP on physical interfaces and LAGs.

S4820T

Syntax

gvrp enable

To disable GVRP on the interface, use the no gvrp enable command.

Defaults Disabled.

Command Modes CONFIGURATION-INTERFACE