Users Guide

Usage Information
Fixed registration prevents an interface, congured using the command line, to belong to a VLAN (static
conguration) from being uncongured when it receives a Leave message. Therefore, Registration mode
on that interface is xed.
Normal registration is the default registration. The port’s membership in the VLAN depends on GVRP. The
interface becomes a member of a VLAN after learning about the VLAN through GVRP. If the VLAN is
removed from the port that sends GVRP advertisements to this device, the port stops being a member of
the VLAN.
To advertise or learn about VLANs through GVRP, use the forbidden command when you do not want
the interface.
Related Commands show gvrp — displays the GVRP conguration including the registration.
protocol gvrp
Access GVRP protocol — (cong-gvrp)#.
S4820T
Syntax
protocol gvrp
Defaults Disabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Related Commands disable — globally disables GVRP.
GARP VLAN Registration (GVRP)
615