Users Guide

To copy a le from

an external USB

drive

enter usbflash://filepath

Command Modes EXEC Privilege

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S6000-ON. Added the nfsmount:<mount-point>

parameters that enables you to mount a remote NFS le system.

9.4(0.0) Added the compressed-cong parameter.

9.0.2.0 Introduced on the S6000.

8.4.1.0 Added IPv6 addressing support for FTP, TFTP, and SCP.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.2.1.0 Added usbflash and rpm0usbflash commands on E-Series ExaScale.

7.6.1.0 Introduced on the S-Series and added the SSH port number to the SCP prompt

sequence on all systems.

7.5.1.0 Introduced on the C-Series.

E-Series Original command.

Usage Information Dell Networking OS supports a maximum of 100 les at the root directory level, on both the internal and

external Flash.

When copying a le to a remote location (for example, using Secure Copy [SCP]), enter only the keywords

and Dell Networking OS prompts you for the rest of the information. For example, when using SCP, you can

enter copy running-config scp: where running-config is the source and the target is specied

in the ensuing prompts. Dell Networking OS prompts you to enter any required information, as needed for

the named destination—remote destination, destination lename, user ID, password, etc.

When you use the copy running-config startup-config command to copy the running

conguration (the startup conguration le amended by any conguration changes made since the system

was started) to the startup conguration le, Dell Networking OS creates a backup le on the internal ash

of the startup conguration.

Dell Networking OS supports copying the running-conguration to a TFTP server, an FTP server, or a

remote NFS le system. For example:

• copy running-config tftp:

• copy running-config ftp:

• copy running-config nfsmount://<mount-point>/filepath

File Management