Users Guide

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the S-Series

Usage Information You must include the colon (:) when entering this command.

After reformatting is complete, three empty directories are automatically created on ash:

CRASH_LOG_DIR, TRACE_LOG_DIR and NVTRACE_LOG_DIR.

CAUTION: This command deletes all les, including the startup conguration le. So, after

executing this command, consider saving the running cong as the startup cong (use the write

memory command or copy run start command).

Related Commands

copy – copies the current conguration to either the startup-conguration le or the terminal.

show le-systems – displays information about the le systems on the system.

fsck ash

Checks the ash le system for errors.

Syntax

fsck flash:

fsck usbflash:

Defaults none

Command Modes EXEC Privilege