Users Guide

off on on off
off off off off
off off off off
on off off on
on on on on
on on on on
off off off off
off off off off
on on on on
on on on on
Related Commands
show running-cong — displays the ow conguration parameters (non-default values only).
show interfaces — displays the negotiated ow control parameters.
interface
Congure a physical interface on the switch.
S4820T
Syntax
interface interface range
Parameters
interface Enter one of the following keywords and slot/port or number information:
• For a null interface, enter the keyword null then the slot/port information.
The Null interface number is 0.
• For the Management interface on the stack-unit, enter the keyword
ManagementEthernet then the slot/port information. The slot range is from
0 to1. The port range is 0.
•
For a Loopback interface, enter the keyword loopback then a number from 0
to 16383.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
• For a Tunnel interface, enter the keyword tunnel then the tunnel ID. The
range is from 1 to 16383.
• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
range (Optional) Enter the keyword range to congure an interface range.
Defaults Not congured.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Added the support for interfaces.
666
Interfaces