Users Guide

clear management application pkt-cntr
Clear management application packet counters for all management application types.
S4820T
Syntax
clear management application pkt-cntr
Defaults None.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2.(0.0) Introduced on the Z9000, S4810, and S4820T.
clear management application pkt-fallback-cntr
Clear management application packet fallback counters for all management application types.
S4820T
Syntax
clear management application pkt—fallback-cntr
Defaults None.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2.(0.0) Introduced on the Z9000, S4810, and S4820T.
management egress-interface-selection
To make congured application trac egress through the management port instead of the front-end (FE) port, enable and congure
a management egress interface.
S4820T
Syntax
management egress-interface-selection
To disable and remove management egress interface selection (EIS) congurations, use the no
management egress-interface-selection command.
Defaults None.
Command Modes CONFIGURATION
716
Interfaces