Users Guide
Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced.
Usage Information Retries are 20 seconds apart.
Related Commands show arp retries — displays the congured number of ARP retries.
arp timeout
Set the time interval for an ARP entry to remain in the ARP cache.
S4820T
Syntax
arp timeout minutes
Parameters
minutes Enter the number of minutes. The range is from 0 to 35790. The default is 240
minutes.
Defaults 240 minutes (4 hours)
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.2.1.1 Introduced on the E-Series.
Related Commands show interfaces — displays the ARP timeout value for all available interfaces.
IPv4 Routing
747