Users Guide
Parameters
unit-number Enter the number of the stack unit.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to clear all FIB entries
corresponding to that VRF.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Added support for VRF.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.19.0 Introduced on the S4820T.
Usage Information To clear Layer 3 CAM inconsistencies, use this command.
CAUTION: Executing this command causes trac disruption.
Related Commands show ip b stack-unit — shows FIB entries on a specied stack-unit.
clear ip route
Clear one or all routes in the routing table.
S4820T
Syntax
clear ip route [vrf vrf-name] {* | ip-address mask}
Parameters
vrf vrf-name (Optional) Enter the keyword vrf and then the name of the VRF to clear the
routes corresponding to that VRF.
* Enter an asterisk (*) to clear all learned IP routes.
ip-address mask Enter a specic IP address and mask in dotted decimal format to clear that IP
address from the routing table.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
750
IPv4 Routing