Users Guide
Description
Total Entries Lists the total number of ARP entries in the ARP table.
Static Entries Lists the total number of congured or static ARP entries.
Dynamic Entries Lists the total number of learned or dynamic ARP entries.
CPU Lists which CPU the entries are stored on.
Example (Summary)
#show arp summary
TotalEntries Static Entries Dynamic Entries CPU
----------------------------------------------
83 0 83 CP
Dell
Related Commands
ip local-proxy-arp — enables/disables Layer 3 communication in secondary VLANs.
switchport mode private-vlan — sets PVLAN mode of the selected port.
show arp retries
Display the congured number of ARP retries.
S4820T
Syntax
show arp retries
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.1.0 Introduced.
Related Commands
arp retries — sets the number of ARP retries in case the system does not receive an ARP reply in response
to an ARP request.
784
IPv4 Routing