Users Guide

Field Description
• ?? — the entry is suspect.
TTL Displays the amount of time until the entry ages out of the cache. For dynamically
learned entries only.
Type Displays IP as the type of entry.
Address Displays the IP addresses assigned to the host.
Example
Dell#show hosts
Default domain is not set
Name/address lookup uses static mappings
Name servers are not set
Host Flags TTL Type Address
-------- ----- ---- ---- -------
ks (perm, OK) - IP 2.2.2.2
4200-1 (perm, OK) - IP 192.68.69.2
1230-3 (perm, OK) - IP 192.68.99.2
ZZr (perm, OK) - IP 192.71.18.2
Z10-3 (perm, OK) - IP 192.71.23.1
Dell#
Related Commands
traceroute — views the DNS resolution.
ip host — congures a host.
show ip cam linecard
View CAM entries for a port pipe on a line card.
S4820T
Syntax
show ip cam linecard number port-set pipe-number [ip-address mask [longer-
prefixes] | index index-number | summary | vrf vrf instance]
Parameters
number Enter the number of the line card.
pipe-number Enter the number of the line card’s port-pipe. The range is from 0 to 1.
ip-address mask
[longer-prex]
(OPTIONAL) Enter the IP address and mask of a route to CAM entries for that
route only. Enter the keyword longer-prefixes to view routes with a common
prex.
index index-number (OPTIONAL) Enter the keyword index then the CAM index number. The range
depends on CAM size.
summary (OPTIONAL) Enter the keyword summary to view a table listing route prexes and
the total number of routes that can be entered into the CAM.
vrf instance (OPTIONAL) E-Series Only: Enter the keyword vrf then the VRF instance name
to show CAM information as it applies to that VRF instance.
Command Modes
• EXEC
786
IPv4 Routing