Users Guide

Field Description
EC Displays the number of ECMP paths.
Example
Dell>show ip fib linecard 12
Destination Gateway First-Hop Mac-Addr Port VId Index
EC
--------------------------------------------------------------------------------
3.0.0.0/8 via 100.10.10.10, So 2/8 100.10.10.10 00:01:e8:00:03:ff So 2/8
0 60260 0
3.0.0.0/8 via 101.10.10.10, So 2/9
00.10.10.0/24 Direct, So 2/8 0.0.0.0 00:01:e8:00:03:ff So 2/8 0
11144 0
100.10.10.1/32 via 127.0.0.1 127.0.0.1 00:00:00:00:00:00 CP
0 3276 0
100.10.10.10/32 via 100.10.10.10, So 2/8 100.10.10.10 00:01:e8:00:03:ff So 2/8
0 0 0
101.10.10.0/24 Direct, So 2/9 0.0.0.0 00:00:00:00:00:00 RP2
0 11145 0
101.10.10.1/32 via 127.0.0.1 127.0.0.1 00:00:00:00:00:00 CP
0 3277 0
101.10.10.10/32 via 101.10.10.10, So 2/9 101.10.10.10 00:01:e8:01:62:32 So 2/9
0 1 0
Dell>
show ip b stack-unit
View all Forwarding Information Base (FIB) entries of a specic stack-unit.
S4820T
Syntax
show ip fib stack-unit id vrf vrf-name [ip-address [mask] [longer-prefixes] | summary]
Parameters
id Enter the S-Series stack unit ID. The unit ID range is from 0 to 11 for the S4820T.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to view FIB entries corresponding to that VRF.
ip-address mask (OPTIONAL) Enter the IP address of the network destination to view only information on that destination. Enter the IP address in
dotted decimal format (A.B.C.D). Enter the mask in slash prex format (/X).
longer-prexes (OPTIONAL) Enter the keywords longer-prefixes to view all routes with a common prex.
summary (OPTIONAL) Enter the keyword summary to view the total number of prexes in the FIB.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Added support for VRF.
792
IPv4 Routing