Users Guide
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.10.0 Introduced on the S4810.
ipv6 access-list
Congure an access list based on IPv6 addresses or protocols.
S4820T
Syntax
ipv6 access-list access-list-name cpu-qos {permit | deny} ospfv3
To delete an access list, use the no ipv6 access-list access-list-name command.
Parameters
access-list-name Enter the access list name as a string, up to 140 characters.
cpu-qos Enter the keyword cpu-qos to assign this ACL to control plane trac only
(CoPP).
permit Enter the keyword permit to congure a lter to forward packets meeting this
condition.
deny Enter the keyword deny to congure a lter to drop packets meeting this
condition.
ospfv3 Specify that this ACL is for OSPFv3 control plane trac
Defaults All access lists contain an implicit “deny any”; that is, if no match occurs, the packet is dropped.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Added support for CoPP for OSPFv3 on the S4810, S4820T, S6000, and Z9000
platforms.
9.0.2.0 Introduced on the S6000
8.3.11.1 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
IPv6 Access Control Lists (IPv6 ACLs)
817