Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4820T

821

822

823

824

825

826

827

828

829

830

clear ipv6 route

Clear (refresh) all or a specic route from the IPv6 routing table.

S4820T

Syntax

clear ipv6 route [vrf vrf-name] {* | ipv6-address prefix-length}

Parameters

vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the VRF to clear the

IPv6 routes corresponding to that VRF.

* Enter the * to clear (refresh) all routes from the IPv6 routing table.

ipv6-address prex-

length

Enter the IPv6 address in the x:x:x:x::x format then the prex length in the /x

format. The range is from /0 to /128.

NOTE: The :: notation species successive hexadecimal elds of zeros.

Command Modes EXEC Privilege

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Added support for VRF.

9.0.0.0 Introduced on the Z9000.

8.3.19.0 Introduced on the S4820T.

8.3.7.0 Introduced on the S4810.

8.2.1.0 Introduced on the E-Series ExaScale.

7.8.1.0 Introduced on the C-Series and S-Series.

7.4.1.0 Introduced on the E-Series TeraScale.

clear ipv6 mld_host

Clear the IPv6 MLD host counters and reset the elapsed time.