Users Guide

NOTE: If a route has a mask greater than 64, no output is displayed and no output is displayed for
show ipv6 cam stack-unit unit-number port-set {0-1} ipv6-address, but an
equivalent /64 entry would be listed in the show ipv6 cam stack-unit unit-number
port-set {0-1}
output. Similarly, if there is more than one ECMP object with a destination
route that has a mask greater than 64, if the rst 64 bits in the destination routes of the ECMP
objects are the same, only one route is installed in CAM even though multiple ECMP path entries
exist.
NOTE: The self address is displayed in the neighbor portion for the show ipv6 cam stack-
unit unit-number port-set command.
show ipv6 control-plane icmp
Displays the status of the icmp control-plane setting for the error eate limit setting.
S4820T
Syntax
show ipv6 control-plane icmp
Default 100
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Related Commands ipv6 owlabel-zero — Congure IPv6 address auto-conguration for the management interface.
show ipv6 b stack-unit
View all FIB entries.
S4820T
Syntax
show ipv6 fib [vrf vrf-name] stack-unit unit-number [summary | ipv6-
address]
Parameters
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the VRF to display
neighbors corresponding to that VRF.
slot-number Enter the number of the stack unit.
836
IPv6 Basics