Users Guide
Version Description
8.3.7.0 Introduced on the S4810.
Related Commands ipv6 nd dad attempts — Congure system to set the ow label eld in the packets to zero.
show ipv6 interface
Display the status of interfaces congured for IPv6.
S4820T
Syntax
show ipv6 interface interface [brief] [configured] [loopback interface-
number] [managementethernet slot/port] [port-channel number] [stack-unit
id] [tengigabitethernet slot | slot/port] [fortyGigE slot | slot/port]
[tunnel tunnel-id] [vlan vlan-id]
Parameters
interface (OPTIONAL) Enter the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
•
For a Loopback interface, enter the keyword loopback then a number from 0
to 16383.
• For a port channel interface, enter the keywords port-channel then a
number.
• For a Null interface, enter the keyword null then the Null interface number.
• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
• For stacking, enter the keywords stack-unit then the stack-unit ID.
• For a tunnel interface, enter the keyword tunnel then the tunnel ID.
brief (OPTIONAL) View a summary of IPv6 interfaces.
congured (OPTIONAL) View information on all IPv6 congured interfaces.
managementethern
et slot/ port
(OPTIONAL) View information on an IPv6 Management port. Enter the slot
number (0-1) and port number zero (0).
loopback (OPTIONAL) View information for IPv6 Loopback interfaces.
port-channel (OPTIONAL) View information for IPv6 port channels.
tengigabitethernet (OPTIONAL) View information for an IPv6 tengigabitethernet interface.
fortyGigE (OPTIONAL) View information for an IPv6 fortygigabitethernet interface.
stack-unit id (OPTIONAL) View information for stacking.
tunnel tunnel-id (OPTIONAL) View information for a tunnel interface.
vlan (OPTIONAL) View information for IPv6 VLANs.
Defaults none
838
IPv6 Basics