Users Guide

ash: After entering the keyword flash:, you can either follow it with the location of the source le in this form: flash//
filepath or press Enter to launch a prompt sequence.
A: | B: Enter the partition to upgrade from the ash.
stack-unit: Enter the keywords stack-unit: to synch the image to the stack-unit.
le-url Enter the following location keywords and information to upgrade using an Dell Networking OS image other than the
one currently running:
• To specify an Dell Networking OS image on the internal ash, enter flash:// file-path/filename.
• To specify an Dell Networking OS image on an FTP server, enter ftp://user:password@hostip/
filepath.
• To specify an Dell Networking OS image on the external ash, enter slot0://file-path/filename.
• To copy a le on a TFTP server, enter tftp://hostip/filepath/filename.
where hostip is either an IPv4 dotted decimal address or an IPv6 URI [x:x:x:x::x] format address.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell Networking OS Command Line
Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.0(0.0) Added support for IPv6 for the file-url parameter.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000. Added support for the SSD on the Z9000 only.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Added support for TFTP and SCP.
7.6.1.0 Introduced on the S-Series.
Usage Information
RFC 3986 species that IPv6 host addresses in a uniform resource identier (URI) must be enclosed in square brackets, [X:X:X:X::X]. For
maximum exibility this command accepts IPv6 host addresses with or without the square brackets.
Reload Dell Networking OS after executing this command. To copy Dell Networking OS from the management unit to one or more stack
members, use the upgrade system stack-unit (S-Series stack member) command.
Example
Dell# upgrade system ?
ftp: Copy from remote file system (ftp://userid:password@hostip/filepath)
scp: Copy from remote file system (scp://userid:password@hostip/filepath)
tftp: Copy from remote file system (tftp://hostip/filepath)
Dell# upgrade system ftp://username:password@10.11.1.1/FTOS-SB-7.7.1.0.bin
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!
Erasing Sseries ImageUpgrade Table of Contents, please wait
.!..................................................................................................
....................................................................................................
....................................................................................................
....................................................................................................
....................................................................................................
....................................................................................................
84
File Management