Users Guide
When a channel member is added to a port-channel and there is not enough ACL CAM space, the MAC limit
functionality on that port-channel is undened. When this occurs, un-congure the existing conguration
rst and then reapply the limit with a lower value.
Related Commands
mac learning-limit mac-address-sticky — Replaces deprecated no-station-move parameter.
show mac learning-limit — displays MAC learning-limit conguration.
mac learning-limit learn-limit-violation
Congure an action for a MAC address learning-limit violation.
S4820T
Syntax
mac learning-limit learn-limit-violation {log | shutdown}
To return to the default, use the no mac learning-limit learn-limit-violation {log |
shutdown} command.
Parameters
log Enter the keyword log to generate a syslog message on a learning-limit violation.
shutdown Enter the keyword shutdown to shut down the port on a learning-limit violation.
Defaults none
Command Modes INTERFACE (conf-if-interface-slot/port)
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the S-Series.
7.8.1.0 Introduced on the C-Series.
7.5.1.0 Introduced on the E-Series.
Usage Information This command is supported on physical interfaces, static LAGs, and LACP LAGs.
Related Commands show mac learning-limit — displays details of the mac learning-limit.
Layer 2
927