Users Guide

mac learning-limit mac-address-sticky
Maintain the dynamically learned mac addresses as sticky MAC addresses on the selected port.
S4820T
Syntax
mac learning-limit mac-address-sticky
To convert the sticky MAC addresses to dynamic MAC addresses, use the no mac learning-limit
command.
Parameters
mac-address-sticky Congures the dynamic MAC addresses as sticky on an interface.
Defaults none
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Introduced on the S4810.
Usage Information If you congure mac-learn-limit and the sticky MAC feature is enabled, dynamically learned MAC
addresses are converted to sticky for that port. Any new MAC address that is learned also becomes sticky
for that port.
Related Commands show mac learning-limit — displays the details of the mac learning-limit.
mac learning-limit station-move-violation
Specify the actions for a station move violation.
S4820T
Syntax
mac learning-limit station-move-violation {log | shutdown-both | shutdown-
offending | shutdown-original}
To disable a conguration, use the no mac learning-limit station-move-violation
command, then the congured keyword.
Parameters
log Enter the keyword log to generate a syslog message on a station move violation.
shutdown-both Enter the keyword shutdown to shut down both the original and oending
interface and generate a syslog message.
shutdown-oending Enter the keywords shutdown-offending to shut down the oending interface
and generate a syslog message.
928
Layer 2