Users Guide

Version Description

8.3.11.4 Replacement command for the Z9000. Replaces the enable xfp-power-

updates command

8.3.10.0 Replacement command for the S4810 only. Replaces the enable xfp-power-

updates command.

Usage Information To enable polling and to congure the polling frequency, use this command.

end

Return to EXEC Privilege mode from other command modes (for example, CONFIGURATION or ROUTER OSPF modes).

Syntax

end

Command Modes

• CONFIGURATION

• SPANNING TREE

• MULTIPLE SPANNING TREE

• LINE

• INTERFACE

• TRACE-LIST

• VRRP

• ACCESS-LIST

• PREFIX-LIST

• AS-PATH ACL

• COMMUNITY-LIST

• ROUTER OSPF

• ROUTER RIP

• ROUTER ISIS

• ROUTER BGP

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

8.1.1.0 Introduced on the E-Series ExaScale.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series and E-Series.

Control and Monitoring