Deployment Guide

20 Dell EMC Networking OS10 Enterprise Edition Switch Configuration Guide for VxRail 4.5
6.3 Factory default configuration
The configuration commands in the sections that follow begin with S5148F-ON switches at their factory
default settings. Dell EMC PowerSwitches running OS10EE can be reset to their default configuration as
follows:
OS10# delete startup-configuration
Proceed to delete startup-configuration [confirm yes/no(default)]:y
OS10# reload
System configuration has been modified. Save? [yes/no]:n
Proceed to reboot the system? [confirm yes/no]:y
The switch reboots to its factory default configuration.
Note: OS10EE at its default settings has Telnet disabled, SSH enabled, Rapid per-VLAN Spanning Tree Plus
(RPVST+) enabled, and the OOB management interface configured to get its IP address via DHCP. The
default username and password are both admin. Dell EMC recommends changing the admin password to a
complex password during the first login.