Deployment Guide

36 Dell EMC Networking OS10 Enterprise Edition Switch Configuration Guide for VxRail 4.5

Note: For the dual switch without VLT topology, the VLAN portion of the command output is as follows:

NUM Status Description Q Ports

1 Active A Eth1/1/1-1/1/8,1/1/10-

1/1/16,1/1/21-1/1/52

A Po127

1611 Active InBand_Mgmt T Po127

A Eth1/1/9,1/1/17-1/1/20

1612 Active vMotion T Eth1/1/17-1/1/20

T Po127

1613 Active vSAN T Eth1/1/17-1/1/20

T Po127

1614 Active VM_Network_A T Eth1/1/17-1/1/20

T Po127

1615 Active VM_Network_B T Eth1/1/17-1/1/20

T Po127

For the single switch topology, the VLAN portion is as follows:

NUM Status Description Q Ports

1 Inactive A Eth1/1/1-1/1/8,1/1/11-

1/1/16,1/1/25-1/1/54

1611 Active InBand_Mgmt A Eth1/1/9-1/1/10,1/1/17-

1/1/24

1612 Active vMotion T Eth1/1/17-1/1/24

1613 Active vSAN T Eth1/1/17-1/1/24

1614 Active VM_Network_A T Eth1/1/17-1/1/24

1615 Active VM_Network_B T Eth1/1/17-1/1/24

8.1.4 show lldp neighbors

The show lldp neighbors command is useful for identifying connected equipment. Interface 1/1/9 is

connected to the jump box. Interfaces 1/1/17-20 are connected to the Broadcom adapter in each of the VxRail

nodes, and 1/1/53-54 are connected to the other leaf.

S5148F-Leaf1A#show lldp neighbors

Loc PortID Rem Host Name Rem Port Id Rem Chassis Id

--------------------------------------------------------------------------------

ethernet1/1/9 Not Advertised 00:0a:f7:38:ba:a0 00:0a:f7:38:ba:a0

ethernet1/1/17 Broadcom Adv. Dua... 00:0a:f7:b6:15:d0 00:0a:f7:b6:15:d0

ethernet1/1/18 Broadcom Adv. Dua... 00:0a:f7:b6:1a:80 00:0a:f7:b6:1a:80

ethernet1/1/19 Broadcom Adv. Dua... 00:0a:f7:b6:11:c0 00:0a:f7:b6:11:c0

ethernet1/1/20 Broadcom Adv. Dua... 00:0a:f7:b6:1c:10 00:0a:f7:b6:1c:10

ethernet1/1/53 S5148F-Leaf1B ethernet1/1/53 d8:9e:f3:bf:ae:00

ethernet1/1/54 S5148F-Leaf1B ethernet1/1/54 d8:9e:f3:bf:ae:00

Note: For the dual switch without VLT topology, the output is identical to the above. For the single switch

topology, the output includes all eight node-connected ports, and ports 1/1/53-54 are not used.