Users Guide

Unlock conguration changes

OS10# unlock

Change to transaction-based conguration

To change to transaction-based conguration mode for a session, enter the start transaction command

1 Change to transaction-based conguration in EXEC mode.

start transaction

2 Enable, for example, an interface from INTERFACE mode.

interface ethernet 1/1/1/

no shutdown

3 Save the conguration.

do commit

NOTE: After you enter the do commit command, the current session switches back to the default behavior of committing

all conguration changes automatically.

Save conguration changes manually

OS10# start transaction

OS10# configure terminal

OS10(config)#

OS10(config)# interface ethernet 1/1/1

OS10(config-if-eth1/1/1)# no shutdown

OS10(config-if-eth1/1/1)# do commit

Back up or restore conguration

The running conguration contains the current system conguration which you can copy to and from a server for backup and restore

purposes. You can also copy the running conguration locally to and from the home: and cong: directories on the switch.

The startup conguration le is maintained in the cong system folder and is called system.xml. When you make changes to conguration

les, use the reload command to reboot OS10 with the updated conguration.

Copy the running conguration to the startup conguration

OS10# copy running-configuration startup-configuration

View /cong directory

OS10# dir config

Directory contents for folder: config

Date (modified) Size (bytes) Name

--------------------- ------------ -----------

2017-04-26T15:23:46Z 26704 startup.xml

Backup startup le

OS10# copy config://startup.xml config://backup-9-28.xml

Backup startup le to server

OS10# copy config://startup.xml scp://userid:password@hostip/backup-9-28.xml

Getting Started