Users Guide

6 admin 17 0 0 4 2017-07-12T03:55:18Z
*7 admin 10 0 0 0 2017-07-12T04:42:55Z
OS10#
User session management commands
exec-timeout
Congure timeout in seconds for all the user sessions.
Syntax
exec-timeout timeout-value
Parameters timeout-value — Enter the timeout value in seconds (0 to 3600).
Default Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command disables the timeout.
Example
OS10(config)# exec-timeout 300
OS10(config)#
Supported Releases 10.3.1E or later
kill-session
Terminate a user session.
Syntax
kill-session session-ID
Parameters session-ID — Enter the user session ID.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# kill-session 3
Supported Releases 10.3.1E or later
show sessions
Displays the active management sessions.
Syntax
show sessions
Parameters None
Default Not congured
Command Mode EXEC
Usage Information Use this command to view information about the active user management sessions.
Example
OS10# show sessions
350 System management