Users Guide
show inventory
Displays system inventory information.
Syntax
show inventory
Parameters None
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show inventory
Product : S5148F-ON
Description : S5148F-ON 48x25GbE, 6x100GbE QSFP28 Interface Module
Software version : 10.3.2E(X)
Unit Type Part Number Rev Piece Part ID Svc Tag Exprs Svc Code
-------------------------------------------------------------------------------------------
* 1 S5148F-ON 0X4XRX X01 CN-0X4XRX-CES00-798-0029 9CLSG02 203 532 341 78
1 S5148F-ON-PWR-2-AC 02RPHX A00 CN-02RPHX-DED00-788-02YZ
1 S5148F-ON-FANTRAY-1 03CH15 A00 CN-03CH15-CES00-78C-0076
1 S5148F-ON-FANTRAY-2 03CH15 A00 CN-03CH15-CES00-78C-0073
1 S5148F-ON-FANTRAY-3 03CH15 A00 CN-03CH15-CES00-78C-0095
1 S5148F-ON-FANTRAY-4 03CH15 A00 CN-03CH15-CES00-78C-0075
Supported Releases 10.2.0E or later
show ip management-route
Displays the IPv4 routes used to access the management port.
Syntax
show ip management-route [all | connected | summary | static]
Parameters
• all — (Optional) Display the IPv4 routes that the management interface uses.
• connected — (Optional) Display only routes directly connected to a management interface.
• summary — (Optional) Display the number of active and non-active management routes and their remote
destinations.
• static — (Optional) Display non-active management routes.
Default Not congured
Command Mode EXEC
Usage Information Use this command to view the IPv4 static routes congured for the management port. Use the management
route command to congure an IPv4 or IPv6 management route.
Example
OS10# show ip management-route
Destination Gateway State Source
-----------------------------------------------------------------
192.168.10.0/24 managementethernet Connected Connected
Supported Releases 10.2.2E or later
54 Getting Started