Users Guide

Supported Releases 10.2.0E or later
link-bundle-utilization
Congures link-bundle utilization.
Syntax
link-bundle-utilization trigger-threshold value
Parameters value — Enter the percentage of port-channel bandwidth that triggers trac monitoring on port-channel
members (0 to 100).
Default Disabled
Command Mode CONFIGURATION
Usage Information None
Example
OS10(config)# link-bundle-utilization trigger-threshold 10
Supported Releases 10.2.0E or later
mgmt
Congures the specied VLAN as the management VLAN.
Syntax
mgmt
Parameters None
Default Not congured
Command Mode VLAN INTERFACE
Usage Information Use the no version of this command to remove the conguration.
Example
OS10(config)# interface vlan 11
OS10(conf-if-vl-11)# mgmt
Supported Releases 10.3.0E or later
mtu
Sets the link maximum transmission unit (MTU) frame size for an Ethernet L2 or L3 interface.
Syntax
mtu value
Parameters value — Enter the maximum frame size in bytes (1280 to 65535).
Default 1532 bytes
Command Mode INTERFACE
Usage Information
To return to the default MTU value, use the no mtu command. If an IP packet includes a Layer 2 header, the IP
MTU must be at least 32 bytes smaller than the L2 MTU.
• Port-channels
– All members must have the same link MTU value and the same IP MTU value.
Interfaces 81