Owners Manual
Table Of Contents
Table 3. Firewall parameters (continued)
Parameter # Parameter data
Remove the IPv4 address with timeout
rule
15 Data 1:4—IP address
● MS-byte first. The IPv4 address type
blocked or unblocked based on the
state.
● Date 5:10—Start time
● [5:6]—Year
● LS-byte first if little endian system.
Two-byte data required to form year.
● 7—month
● 8—date
● 9—hour
● 10—minute
● Date 11-16—stop time
● [11:12]—Year
● LS-byte first if little endian system.
Two-byte data required to form year.
● 13—month
● 14—date
● 15—hour
● 16—minute
Remove the range IPv4 address with
timeout rule
16 Data 1:8—IP address
● [1:4]—Starting IP address blocked or
unblocked based on the state.
● [5:8]—Ending IP address till IPs are
blocked or unblocked based on the
state.
● Date 9:14—Start time
● [9:10]—Year
● LS-byte first if little endian system.
Two-byte data required to form year.
●
11—month
● 12—date
● 13—hour
● 14—minute
● Date 15-20—Stop time
● [15:16]—Year
● LS-byte first if little endian system.
Two-byte data required to form year.
● 17—month
● 18—date
● 19—hour
● 20—minute
Remove the IPv4 port number with
timeout rule
17 Data 1—Protocol TCP and UDP
● 0 = TCP
● 1 = UDP
● 2 = both TCP and UDP
● Data 2:3—port number
● [2:3]—Port number from the ports
blocked or unblocked based on the
state.
● Date 4:9—Start time
● [4:5]—Year
●
LS-byte first if little endian system.
Two-byte data required to form year.
Configuration methods 21