Owners Manual
Table Of Contents
Table 3. Firewall parameters (continued)
Parameter # Parameter data
● 6—month
● 7—date
● 8—hour
● 9—minute
● Date 10-15—stop time
● [10:11]—Year
● LS-byte first if little endian system.
Two-byte data required to form year.
● 12—month
● 13—date
●
14—hour
● 15—minute
Remove the IPv4 port number range
with timeout rule
18 Data 1:—Protocol TCP and UPD
● 0 = TCP
● 1 = UDP
● 2 = both TCP and UDP
● Data 2:5—port number
● [2:3]—Port number from the ports
blocked or unblocked based on the
state.
● [4:5]—Port number till the ports
blocked or unblocked based on the
state.
● Date 6:11Start time
● [6:7]—Year
● LS-byte first if little endian system.
Two-byte data required to form year.
● 8—month
● 9—date
● 10—hour
● 11—minute
● Date 12-17—stop time
● [12:13]—Year
● LS-byte first if little endian system.
Two-byte data required to form year.
● 14—month
● 15—date
● 16—hour
● 17—minute
Drop all IPv4 or IPv6 with timeout rule
19 Add iptables rules to block IPv4 and IPv6
traffic to the BMC. The state selector is
not used.
● Data1: Protocol
● Bit 7:2—Reserved
● Bit 1—IPv6
● Bit 0—IPv4
● Date 2:7—Start time
● [2:3]—Year
● LS-byte first if little endian system.
Two-byte data required to form year.
● 4—month
● 5—date
● 6—hour
22 Configuration methods